Logo letter

Functions Of Carbide Punches And Carbide Pins


The projects related to metalwork make use of materials like carbide punches, carbide pins and roll pins to join two pieces of metals together.  Roll pins are materials made of solid metal that are placed and inserted into the hole of the machine.  When repairing for maintaining the machine or equipment, construction staff and workers are bound to remove these roll pins.  There are some events that can make the pins difficult to extract.


Using Punches To Deal With The Situation


One of the easiest ways to extract the roll pins is to be able to expose two ends of the roll pin.  These cases will require a small sized drift pin punch such as carbide torx to be used.  Professionals and workers have to make sure that the size of these drift punches is smaller than the hole that holds the roll pins.  As the roll pins are being removed, it is important for the workers to keep their attention on being careful so as not to flatten the ends of the roll pin.  Workers can opt to do some short careful strokes using a small hammer, as the roll pins can be pushed away from their placements using carbide punches and other small drift pin punches.


The Processes Of Drilling And Tapping


Some roll pins are not easy to remove because they are inserted tightly or there are instances when the backside of the hole is blocked and cannot be accessed.  In these cases, there is a need for workers to drill out the center of the roll pin using carbide drill bits.  The cooling function of a penetrating oil can help you when drilling out, that is why it is important that you make sure you have applied this kind of oil.  After doing this, you can tap the central pin hole to enable you to let in a bolt.  The bolt will be used to pull out the roll pin from the hole.


If you encounter some difficulty in tapping the pin, do not force things out instead, use a self-tapping hardened screw to assist you.  Screw drivers can let you drive the screw into place.  To facilitate pin assembly from the precision hole, you can use a slide hammer to knock the bolt.  To be able to compensate for the sizes of the screw and the bolts used with the roll pins, workers might be asked to make changes at the end of the slide hammer.  Then, allow the penetrating oil to seep in through the roll pins.  This application can help you loosen out the roll pin before removing it. Know more about carbide in http://www.encyclopedia.com/topic/carbide.aspx.


Using Carbide Bits, Punches And Pins For Drilling Out


The only option left when roll pins cannot be removed because of being stuck too much or because of the rust is through the use of carbide pins, punches and bits.  Be sure to do extra caution.